Michelle Ray
CEO and Founder, Certified Speaking Professional, Lead Yourself First Enterprise
Born in Australia and now residing in Vancouver, Michelle is a health and safety speaker renowned for her expertise on leadership, accountability, influence and building outstanding safety cultures.
Michelle has worked with hundreds of leaders and their teams in diverse industries including occupational health and safety within private and public enterprise, construction, mining, as well as oil and gas. She demonstrates a deep understanding of team dynamics, interpersonal communication and personal responsibility.
As an in-demand conference presenter, Michelle utilizes a dynamic, interactive and highly engaging style. She has earned the Certified Speaking Professional Designation, held by less than 800 people worldwide.
You may also like
Glenn Owens
Project Manager, BMA Engineering
Dave Zanette
Project Supervisor, BMA Engineering
The Broadmeadow Proximity Detection (PDS) Project was initiated to address the risk of vehicle to pedestrian and vehicle to vehicle interactions in a low visibility environment. There have been numerous deaths and injuries which have occurred due to workers being contacted or crushed by mobile equipment in the underground environment. Following the fatality at the Moranbah North Coal Mine (2007), a Shuttle car incident at San Juan and the fatality at Escondida in 2016. Broadmeadow is committed to the implementation of an engineering solution. Proximity Detection Systems have the potential to reduce the risk of underground mobile equipment injuries and fatalities.
The project has completed stage 1 trials of a Proximity Detection System (PDS) fitted to vehicles (Shuttle Car (SC), Loader (LHD) and Personnel Transporter (PJB)) designed to detect the presence of a pedestrian or vehicle in a hazardous location around a machine. Should a worker enter this zone, the system will issue a warning signal – a combination of audible and visual alarms – to notify the individual as well as the machine operator of potential danger. The system was also configured on the SC to automatically slow and stop when a pedestrian was detected in the warning and danger zones of the machine. Stage 1 of the trial was conducted both in surface and underground testing areas in isolation from production activities.
The PDS is currently in stage 2 trials at Broadmeadow. During this stage the PDS (with auto slow\stop enabled) has been installed on an operating shuttle car currently in production underground in a Broadmeadow Development panel. This is the first SC in Australia to run in production with a PDS in full auto slow\stop mode.
A LHD fitted with audible and visual alarms is also being trialled underground in a production environment, this trial involve fitting various attachments to the LHD including personnel-baskets, pipe trailer and stone dust pod. Various attachments require configuration changes to the system to ensure the machine zone sizes can grow and shrink dynamically to suit the attached implement or machine speed. One of the most challenging parts of the PDS trials is the application of silent zone technology which enables an operator(s) to work within the fields of the machine in what is designated as a safe area i.e. cab or inside a personnel-basket. This silent zone technology has been applied to a bolter\miner and at Broadmeadow and it effectively makes all operators standing in safe zones on the bolter\miner platform invisible to the shuttle car PDS as it docks to the machine for loading.
During the course of the trials over 200 different vehicle to pedestrian and vehicle to vehicle scenarios have been tested. If a pedestrian comes within 7 to 8 metres of a shuttle car it will slow to 50% speed and if a pedestrian comes within 4 to 5 metres of the shuttle car it will automatically stop before hitting the pedestrian. Feedback from operators has been that the system gives them a greater awareness of machine NO-GO Zones and operators are standing further back from the machine.
The PDS is current installed on the following machines at Broadmeadow:
- Full Auto-Stop Mode – 2 x Shuttle Cars (with a 3rd installation in progress)
- Warning only Mode – 1 x Underground Personnel Transporter, 2 x Underground Loaders (LHDs), 1 x Electric Vehicle, 1 x Moxy Articulated Truck
PDS Tags are currently installed in 180 Caplamps.
Ravindu Goonawardene
Geology and Geotechnical Superintendent, Anglo American – Grosvenor Mine
Chris Crosby
Surveying Superintendent, Anglo American – Grosvenor Mine
The risk of fatalities due to roof and rib failures is still prevalent in underground coal mines which highlights the fundamental importance of monitoring roof and ribs in underground roadways. Monitoring strata deformation and convergence in underground roadways is a key metric for measuring instability of excavations. Visual inspections, telltales, extensometers and instrumented bolts are some of the methods used to quantify strata deformation.
The significant limitations of the current methods only provide a point-measurement along the roadway. Using laser technology allows the mine to scan and measure large regions of roof and ribs across continuous regions with millimetre accuracy.
The Maptek SR3 laser scanner has been used as a control during the rib optimisation trial at Grosvenor. This technology provides a baseline scan and subsequent scans to ascertain the extent of deformation throughout the active development mining areas. Thus, allowing geotechnical engineers to assess the adequacy of the trialled support system. Moreover, this technology allows geotechnical engineers to better analyse geological anomalies (fault orientations, dips, throw), bolting tolerances and excavation dimensions in an effective manner.
David Howell
Tailings and Water Coordinator, Rio Tinto Weipa Operations
Luke Pendrigh
Tailings and Water Electrician, Rio Tinto Weipa Operations
During normal operation at the Water Treatment Plant the inlet screen in the Bio Reactor blocks with debris, sludge and fecal matter. The cleaning of the inlet screen was a laborious task that exposed maintainers to raw sewage and repeated manual handling risks. The crew came up with an engineering control that completely prevented the inlet screen from blocking, eliminating the need to remove and clean the screen. With this new system functioning the crew have removed a great deal of frustration and reduced the handling of this inlet screen to planned maintenance intervals and significantly reducing the crew’s exposure to the biological risk.
Rav Goonawardene
Geology and Geotechnical Superintendent, Anglo American – Grosvenor Mine
Ben Elliot
Trainee ERZ Controller, Anglo American – Grosvenor Mine
A series of floor heave and gas inrush events have occurred during the development mining process in MG103 and MG104 at Grosvenor Underground Coal Mine. These events have exposed coal mine workers to elevated levels of methane preventing safe mining operations.
The presence of an undrained source of gas in the immediate floor, geotechnical floor characteristics, loading environment and various other factors have contributed to the dynamic floor failure. Methane released during these events are originating from the underlaying thin Goonyella Middle Lower (GML) seam which is a thin carbonaceous layer with high ash content. The 1m – 5m interburden thickness between the GM seam and the GML has an increased likelihood of the floor gas release events.
Based on the analysis of these gas events, creating a conduit in the interburden between the GM seam and GML will allow the gas to freely release to the development roadway during development drivage. This will prevent the build up of gas within the interburden creating a floor gas release event.
The proactive interburden fracturing was initiated using water pressure generated from a longwall salvage pump. The current UIS drilling equipment was retrofitted with a series of subs, packers and a fracturing tool to initiate a hydro fracture within the drilled UIS borehole. Once the packers are fully inflated and in position, a diversion valve is then activated to allow the fracturing tool to inject high water pressure to the desired location. Thus, given the complexity of predicting verticality of the hydro fracture in the interburden, a UIS borehole was drilled in the lower section of the GM seam as proving hole to check the effectiveness of hydro fracture.
The main benefit of the proactive interburden fracturing process is having the ability to reduce the likelihood of exposing development coal mine workers at the face to high methane levels.
Dave Zanette
Project Supervisor, BMA
Andrew Batterson
BMA Engineering
The Broadmeadow Battery Electric Vehicle project was initiated to address the residual Similar Exposure Groups (SEG) exposure to Diesel Particulate Matter (DPM).
Over the last 3 years, Broadmeadow (BRM) has successfully completed a number of projects to reduce occupational exposures to DPM for the underground SEGs. These initiatives have resulted in ongoing improvement to the mine’s total exposure profile, which we understand is now approximately one third of most other underground coal mines in Queensland.
After exhausting all options for a suitable lower emissions diesel engine package options for underground personnel transporters BMA initiated an aggressive schedule for implementation of an underground battery electric personnel transporter.
With the local market opportunities exhausted, the BRM team sourced international suppliers with previous experience in manufacturing electric personnel transporters. A supplier was selected and a commitment to implement a surface trial was to commence in FY19.
Broadmeadow set up and implement a team to carry out the FAT testing and trial of the vehicle, the trial included but not limited to determining all required safety, legislative, performance and failure modes required by stakeholders for the trial to be successful. In the back ground the engineering team and supplier conducted the necessary detailed assessments and engineering modifications against current Australian Standards and legislation for the suitability of implementing an underground trial.
BRM has successfully completed surface and underground trials proving the safety, reliability and performance of a battery electric vehicle whilst also validating the extremely low operating cost.
The next phase of the project is to implement full production trials by removing all diesel powered personnel transporters from a development section of the mine to validate the DPM exposure reductions.
Matt Ramsay
Drilling Superintendent – Gas, Anglo American – Moranbah North Mine
The Problem
The rehabilitation of redundant Mine Service boreholes requires the shearing and removal of cemented 20” Steel casing at 1.5m below the ground surface.
This process previously required the entry into the excavation and the risk associated with the manual handling of a hydraulic saw device to cut the casing at required position.
During this cutting process the operators experienced several rotating blade failures that resulted in small shard of steel ejected from the saw blade and contacted the operator’s glove.
The Solution
The strategy to eliminate the hazards identified from investigation of the event; it was actioned to source an alternative device with the capacity to efficiently shear 20” cement encased steel casing, eliminating manual handling, exposure to excavation; via the functionality of remote operation.
The Diamond Wire Saw (DWS) device was identified, assessed and then progressed to primary design functional testing phase in December 2018. With positive observations of improved safety, efficiency and operational performance parameters.
During the trial and testing period, this involved collaboration and engagement of DWS OEM and test operators. The collaboration of stakeholders delivered engineering inputs combined with the collation of test operator feedback facilitated continuous improvement of the DWS device’s re-purposed application into an integrated mobile unit.
The Benefits
The field functional testing and operation of the DWS mobile unit demonstrated:
- Elimination – of traditional rotating blade failure hazard – Guarded Diamond impregnated cable
- Elimination – of manual handling – proximity protected – remotely controlled loader positions and retrieves DWS
- Elimination – CMW entry into excavation – DWS utilizes self-attachment / release function
- Elimination – of manual handling – proximity protected – remotely controlled loader secures the casing during cutting process and relocates to waste transport
- Separation – remote operator console – remove CMW exposure to line of fire
- Separation – remote operator console – remove CMW exposure to excavation
- Operational effectiveness performance realized an increase of 60% on previous methodology
Rod Lansdowne
Outbye Electrical Coordinator
The Problem
A recent incident report identified a “Near Miss” at an underpass intersection between the 2nd main travel routes of the mine, involving a loader and a man transporter. Safety meetings with crews identified that with the LED strip lighting underground, it made it difficult to identify vehicles entering the main headings from blind corners, and suggestions were made to remove strip lighting from around the underpass intersections to allow identification of vehicles at the intersection (via headlights on the vehicles).
The Solution
After further consultation, it was decided not to remove the current lighting from the intersection but to find a solution that would work within all the current controls under the Mine Transport Rules. Work was already being trialled on using coloured LED indication for belt monitoring purposes, and testing began on using the same string of LED to use an amber light to give an indication of movement from around the blind corner. An ultrasonic system was chosen, as a way of removing human behaviour, and testing to confirm functionality, so that either vehicle or pedestrian would activate the warning lights. A trial was put in place at 30ct underpass to test overall functionality and allow feedback from the workforce as to what changes were required prior to implementing through out the mine.
Benefits/Effects
By adding an autonomous warning system, it gives a visual warning to vehicles/pedestrians in the travel roads of movement around the blind corner. Being autonomous, there is no reliance on people’s behaviours or attitude.
Transferability
Already looking at using the same system to change existing block lights on site to ultrasonic, replacing existing drift lighting with the same LED strips, use of LED strips to indicate gas levels at TG machine doors.
Innovation
Combined current technologies to achieve working system.
Approximate Cost – $2600 for single control box and lighting
Clive Hanrahan
Operations Manager – Mine Inertisation, Queensland Mines Rescue Service
Due to the mining environments in some underground operations, particularly longwalls, where the void space in the goaf becomes wider and longer, the potential for spontaneous combustion and fire events is possible and, in some cases, has happened.
The nitrogen foam table is relatively quick to deploy, set up and become operational delivering the gas mixture to the required area. The water in-foam cools the heating whilst the nitrogen gas displaces the oxygen.
Using the nitrogen foam table supplies a medium of water foam and nitrogen gas. The water in-foam cools the heating – one leg of the fire triangle whilst the nitrogen gas displaces the oxygen – second leg of the fire triangle.
The nitrogen foam table allows for the distribution of the gas/foam mixture to either one borehole or by opening secondary valving, an additional borehole can be treated at the same time. Where a spontaneous combustion/fire event has been identified mid pillar, the utilisation of the table to treat two boreholes at the same time will greatly assist in the reduction or elimination of that event.
When drilling boreholes from the surface into underground voids the nitrogen foam table allows the gas/foam mixture to be utilised to create an inert shield whereby the foam acts as a wetting agent to prevent any incendive sparking during the drilling process & the gas displaces any potential oxygen present.
In mining areas: Such as the maingates of longwalls where there is oxygen contained within the airwash zone the gas foam mixture could be utilised to create a “plug” behind the maingate face end shields which would reduce / eliminate any airwash issues. The table can be readily located adjacent to a seal site either prior to or after the seal installation. The gas/foam mixture can be distributed from the nitrogen foam table via piping through the erected seal or hosing through the proposed seal site.
INNOVATION AWARDS 2019
The aim of this Award is to recognise creative and practical solutions to safety and occupational health problems and to promote their application across the Australian Resources Industry.
The Ten Finalists selected prior to the Conference, will present their Innovations during Monday afternoon’s Session. The Winners will be announced at the Conference Dinner on Wednesday evening. There are three Award Categories:
- Winner – as judged by the Industry Judging Panel
- People’s Choice – as judged by the Conference Delegates
- Highly Commended – combined vote count of the Judging Panel and the Conference Delegates
Award Prize
The Winner will have the opportunity to nominate one person associated with the development of the Innovation to attend the A + A Trade Exhibition in Dusseldorf in November as a guest of our sponsor uvex safety Australia.
The Winner will also receive the Queensland Mining Industry Innovation Award Trophy and a Framed Certificate. The Winners of The People’s Choice and Highly Commended Awards will receive a Queensland Mining Industry Innovation Award Trophy and a Framed Certificate. In recognition of the work that goes into preparing each submission, the Conference Committee offers a concession on the registration fee to the principal presenter of an accepted Innovation.
This Award Prize is Proudly Sponsored by uvex safety Australia
HEALTH PROGRAM AWARDS 2019
The aim of this Award is to recognise creative and practical solutions to personal and occupational health problems and to promote their application across the Resources Industry.
Award Prize
The Winning organisation will be announced at the Conference Dinner and will receive $3,000.00 towards the cost of attending a ‘Health’ related Conference of their choice and as approved by the Conference Committee. They will also receive a Perpetual Trophy, a Queensland Mining Industry Health Program Award Trophy and a Framed Certificate.
This Award Prize is Proudly Sponsored by 4cRisk Occupational Health Services
The aim of the Workshop is to provide an interactive forum where approaches to fatigue management may be discussed with experts and peers, with participants having the opportunity to take part in a fatigue risk assessment exercise.
The Workshop will be led by:
Prof. Naomi Rogers
Specialist Fatigue Consultant, Naomi Rogers Fatigue Consulting
John Tate
Barrister, Crown Law
Katie Harrold
Health, Safety and Emergency Management Advisor, Dalrymple Bay Coal Terminal Pty Ltd
Industry Representatives from the Mine Inspectorate, Management and Workforce